Seamless Eavestrough Installation Experts

Seamless Gutter Installation in Edmonton

If you’ve ever dealt with overflowing gutters or water pooling around your home, you already know how quickly a small issue can turn into something expensive.

At Nice Exteriors, we handle gutter installation in Edmonton for homeowners and businesses who want it done properly the first time. No shortcuts, no rushed installs, just solid work that holds up through rain, snow, and everything in between.

We install 5-inch and 6-inch seamless eavestrough systems, built on-site and fitted to your property so they actually do what they’re supposed to do: move water away from your structure.
If you’re not sure what you need yet, that’s fine. Most people aren’t. That’s what we’re here for.

Request an Estimate

Fill out the form below and we’ll contact you within 24 hours.

Gutter Installation Services for Edmonton Homes and Businesses

Not every property has the same drainage needs. A small bungalow doesn’t deal with water the same way a large commercial building does. That’s why we don’t treat installations like a one-size-fits-all job.

Residential Gutter Installation in Edmonton

For homeowners, the goal is pretty straightforward: protect the foundation, prevent roofline issues, and keep things looking clean. We install gutters on:
Everything is measured on-site. No pre-cut guessing, no forcing pieces to fit. A lot of the calls we get are from people replacing older systems that were leaking at the seams or pulling away from the house. Seamless gutters solve most of those problems right away.
Residential Gutter Installation in Edmonton
Commercial Gutter Installation in Edmonton

Commercial Gutter Installation in Edmonton

Commercial properties usually need something a bit tougher. Larger roof areas mean more water, and more water means more pressure on the system.
We install higher-capacity gutters that can handle that load without constant maintenance. We’ve worked on shops, retail units, warehouses, and office buildings.
The focus is always the same: keep water moving and keep it away from where it shouldn’t be.

Built for Alberta Weather

Seamless Eavestrough (5” and 6”)

There’s a reason seamless gutters have become the standard. Older sectional systems rely on multiple joints. And joints are where problems start: leaks, sagging, and separation over time. Seamlessly, the gutter is formed in one continuous piece (aside from corners), which cuts down those weak points.

Why Most People Switch to Seamless:
Choosing Between 5” and 6” Gutters:
A 5-inch gutter works well for most homes. It handles regular rainfall without any issue.
A 6-inch gutter is usually recommended if your roof is larger than average, you have a steeper pitch, or you’ve had overflow issues before.

"We’ll usually point it out right away during the estimate. No upselling, just what actually makes sense for your property."

Our Process

How the Gutter Installation Works

A lot of people expect this to be a long, complicated project. It’s not. Most installs are done in a day, sometimes less.
01.

Assess Roofline

We start by looking at how water currently flows off your roof. Not just where the gutters go, but where the water wants to go.

02.

Form On-Site

We bring the equipment with us and fabricate the gutters right there. Everything is cut to the exact length needed.

03.

Install & Secure

Getting the slope right is what makes the whole system work. Too flat, and water sits. Too steep, and it moves too fast.

04.

Clean Up

Before we leave, we run through everything again and clean up the work area. No scraps left behind, no loose ends.

The Nice Exteriors Standard

The "No Nails" Guarantee

We refuse to cut corners. Discover why our installation method provides a permanent hold that outlasts traditional systems.

Zero Nails Used

Nails eventually pull out of the fascia board due to temperature fluctuations and the weight of ice. We completely eliminated nails from our process to prevent sagging.

Heavy-Duty Steel Hangers

We install heavy-duty hidden steel hangers spaced appropriately to provide unmatched structural integrity, capable of holding massive snow loads.

Rubber Washer Screws

Every steel hanger is secured using specialized screws equipped with rubber washers. This creates a 100% watertight seal, preventing rot in your fascia board.

Average Gutter Installation Cost in Edmonton

One of the first things people want to know is what a new gutter system actually costs. The honest answer is that it depends. But to give you a rough idea, here’s what most homeowners in Edmonton can expect.

Areas We Work In

$1,000 – $2,500

Average-sized homes

$2,500 – $5,000

Larger homes / complex rooflines

$5,000 – $8,000+

*The cost depends on factors like size of the building, gutter size (5” vs 6”), roof access, and number of downspouts needed. That’s for full seamless gutter installation, including materials and labor. Free estimates available!

RECENT WORK

View Our Recent Edmonton Eavestroughing Jobs

Local Experts

Areas We Serve

Based in Edmonton, Nice Exteriors is proud to serve homeowners and businesses across the Greater Edmonton Area. We understand the specific challenges that local weather presents, allowing us to build exterior systems that truly last in our climate.

What We Do

Other Service

Gutter Replacement

Complete tear-down, disposal, and replacement of old, failing gutters to protect your home's foundation and roofline from water damage.

Repair & Cleaning

Comprehensive maintenance including leak sealing, realignment of sagging gutters, debris removal, and leaf guard installation.

Commercial Gutters

High-capacity water management systems designed for warehouses, retail spaces, and large multi-family complexes.

Soffit & Fascia

Premium aluminum soffit and fascia installations to improve attic ventilation and protect your roofline from weather and pests.

Siding Repair

Expert repair services for wind, hail, or wear-and-tear damage to restore the protective envelope and aesthetics of your home.

Shingles Repair

Targeted roof repairs to replace missing shingles and seal exposed areas, ensuring your home remains completely watertight.

Testimonials

What Our Clients Say

Questions? We got answers.

Can’t find what you’re looking for? Reach out to our team directly.

How long does gutter installation in Edmonton usually take?
Most homes are done within a day. Larger or more complex jobs can take longer, but we’ll let you know upfront.
In most cases, yes. Fewer joints means fewer problems down the line, significantly reducing the chance of leaks.
Depends on the condition. If they’re pulling away, leaking in multiple spots, or rusting out, replacement is usually the better option.
Basic cleaning once or twice a year is usually enough. Leaf guards can help reduce buildup if trees are nearby.

Get a Quote for Gutter Installation in Edmonton

If your gutters aren’t doing their job, it’s only a matter of time before something else is affected. You don’t need to overthink it or commit right away.

Reach out, get a quote, and see what makes sense from there.

YOU TELL US. WE LISTEN.

Fill out the form below and we will contact you as soon as possible!